Warning Cookies are used on this site to provide the best user experience. If you continue, we assume that you agree to receive cookies from this site. OK
need some help?call 03300 553640

UMX STARTER KIT - US Gallon

£1,030.00 (exc. VAT)

£1,236.00 (inc. VAT)
Price in points: 103000 points
1 item(s)
+
UMX-KIT-1G

Weight: 116.000 kg

Manufacturer: Total Ink Solutions

The UMX STARTER KIT contains 17 Colours in USG pails plus 2 x USG of UMX Mixing White.

Total Ink Solutions have invested heavily to produce the most colour accurate and cost efficient solution for any print shop large or small to achieve Pantone shades and custom mixed colours.

Use the UMX formulation tool to mix 1000's of Pantone shades as well as create your own unique formulations.


These inks are designed for 100% cotton substrates, and are not opaque. The UMX colour system inks need to be printed onto an under base for dark substrates, if Bleed resistance is required please use Bleed Resistant ink for under base.

Note: Pre-test on actual substrates before any full production run, for dye bleeding, adhesion, wash fastness and other desired effects.

Colour's included in kit:

UMX Mixing White, UMX Mixing Black.

UMX Orange, UMX Red, UMX Burgundy, UMX Blue, UMX Marine Blue, UMX Yellow, UMX Bright Gold.

UMX Dark Magenta, UMX Dark Violet, UMX Dark Blue, UMX Dark Green.

UMX Ultimate Yellow, UMX Ultimate Blue, UMX Ultimate Purple, UMX Ultimate Red, UMX Ultimate Pink.

RECOMMENDED FABRICS:
Light coloured 100% cotton or cotton/polyester blends. Use an under base for printing dark fabrics.

INK APPLICATION:
Colours should be printed without any modifications. If thinning is required, only use TI curable reducer (1% to 5% by volume).

SCREEN MESH AND EMULSION:
43T to 120T any direct or indirect lacquer resistant emulsion. Use 35 to 70 micron capillary film for best results.

SQUEEGEE:
65-75 Durometer sharp edge 65-90-65 or 75-90-75 triple Durometer.

CURE TEMPERATURE:

165C (325F) entire ink film. Test dryer temperatures and wash test printed product before and during a production run.

CLEAN-UP:

Ink degradant or Press wash.


  • Formulated to provide simulations of the PANTONE colour standards for light coloured textile fabrics.
  • High performance,  plastisol inks formulated for ultra high speed automatic printing.
  • Very creamy and short bodied with low tack for ease of printing and significantly improved shear.
  • Very well suited for high definition and resolution with fine detail and halftone printing.
  • Faster production speeds using less pressure, when printing through finer mesh counts.

SDS Info (TOTAL_INK_-_PF_UMX_SERIES-sds_updated.pdf, 2,256 Kb) [Download]

No posts found

Write a review

New Products